How to wash putty with clothes - a question that often arises before students.
Bar-proofreader is a special tool,allowing to correct errors in the written text. This tool is very popular among students. Very often there are situations when a bubble with a corrective fluid, as a result of careless movement, capsizes on clothes. You can also get dirty with a dry tape corrector. Students and students applying the corrector should remember that the stain that forms after the liquid hits the clothes can be cleaned.
Students and students who use the corrector should remember that the stain that forms after the liquid hits the clothes can be cleaned
Therefore, those people who are actively using this tool, you should know how to wash the office putty with clothes.
To determine how to washputty-proofing agent with clothes, and at what point it is best to clean, you need to know the types of existing proof-readers and what type of corrector was applied to clothing.
Know the type of clerical putty you need in order to accurately determine what to wash the putty-proofreader with clothes
On a note! Know the type of clerical putty is necessary in order to determine exactly what to wash the putty-proofreader from the clothes.
Kinds of modern office correctors
Before deciding on the answer, how to washputty from clothes, you need to study the types of existing compounds putty. To date, there are the following types of corrector compositions that differ in the basis.
Before you decide on the answer to how to wash the putty from clothes, you need to study the types of existing compounds putty
The basis of the putty can be:
The easiest way to remove a stain formed on a thing after getting it on the basis of water, and the most difficult is to remove the stain formed from the emulsion composition.
To simplify the work with correction fluidsTo date, hand-proofreaders have been manufactured. These handles are most often filled with liquids on an alcohol and emulsion basis. The principle of operation of such a device is similar to that used in a conventional pen. When pressing on the tip, there is a release in it of some space into which the correction fluid arrives.
The probability of contamination is minimized, it occurs only in the event that there is a mechanical destruction of the corrector housing
The probability of contamination is minimized, itoccurs only in the event that there is a mechanical destruction of the corrector body. Mechanical destruction of the proof-reader handle can occur, for example, when riding a schoolboy on a backpack from a snow slide.
Removal of water-based correction putty
A correction fluid having a water base,Removing from the surface of clothing is much easier compared to other compounds. Such proof-readers are recommended to be purchased for schoolchildren. Before buying the device, you should study the composition of the liquid filled into it in detail. Very often mothers of school children are wondering what can be washed with water-based putty from clothes. Putty of the water-based corrector is easily removed with the help of laundry soap with further washing.
Household soap when removing corrective putty
The procedure for removing contamination is as follows:
It is necessary to take a piece of laundry soap, soak it and rub the surface of clothing on the contaminated area, before moistening it with water.
After a lot of soap rubbed with soap, itsshould be left in a wet condition for 10-15 minutes. It is necessary that the components of laundry soap destroy the components that make up the putty. In this period, the thing should not be immersed in water.
After the end of aging, the contaminated thingshould be washed in the usual way in a basin or a washing machine. During washing, use the detergent that is recommended for use by the clothing manufacturer.
The water-based corrector easily departs from the fabric under the influence of laundry soap.
Washing clothes in a washing machine
Important! In the process of using a piece of soap, you should rub the contaminated area with care, so as not to increase the area of contamination.
Features of the process of cleaning clothes from alcohol-containing putty
The corrector, having an alcohol base, is the second most popular, so many people who use this device are worried about how to wash the putty on alcohol basis from the clothes of the house.
Alcohol when removing corrective putty
A feature of the liquid for correction for alcoholis the presence of an unpleasant odor. Such proof-readers are not recommended for schoolchildren, since it is undesirable for a child to breathe fumes of corrective fluid. In addition, the alcohol composition is much more difficult to remove from the surface of clothing. Most often this type of membership is purchased by organizations and institutions for office needs. This type of corrector dries out when applied to paper much faster than the composition on a water basis.
Nail file when removing corrective putty
On the question whether it is possible to wash the putty on alcohol withclothes, the answer is yes. But at the same time, a person should have plenty of patience. If liquid gets into the clothes, do not rub the clothes until the liquid is completely dry.
After the composition has dried, it should be gently cleaned with a nail file. This action will prevent the spill of the stain from contact with water or other liquid.
Cologne when removing the corrective putty
The next step in cleaning up things from contamination is the painstaking homework on the spot.
For further work on the removal of contamination, it is required to put the thing on a hard surface, having previously covered it with a non-drying rag or towel.
To ensure that during the removal of contaminationDo not spoil the fabric around the stain, it should be moistened with clean water, while taking 1-2 cm of clean cloth around the perimeter of the stain boundary.
After wetting the area of contamination should be on the stain to apply a liquid, which includes alcohol. Such liquids can be:
toilet water, etc.
An alcohol-containing liquid is applied to the contamination with a cotton swab or a cotton pad.
The treatment of the contaminated area should be carried out from the edge of the contamination to its center. This will prevent the spread of pollution over a large area.
The alcohol-containing liquid is applied to the contamination with a cotton swab or cotton pad
After the contamination has been removed with the alcohol-containing liquid, the item should be washed in the usual way with the use of a detergent.
Removal of the corrective composition made on an emulsion basis
If the corrector is on the emulsion basison the fabric of clothing, for its removal should use a special chemical composition, which is designed specifically for this purpose. The emulsion-based corrector is a paint. Therefore, to remove it, you can use recipes designed to remove paints on an emulsion basis.
Ammonia alcohol when removing the corrective composition
The easiest way to remove contaminantsis the use of a solution consisting of water and ammonia in a ratio of 2: 1. After processing the contamination site, the stain should be rubbed and after 10-15 minutes rinse well with water. After that the thing should be washed in the usual way with the usual washing powder. It should be remembered that an unpleasant smell of ammonia occurs during use. However, it should be noted that virtually any means for removing such a complex contamination has an unpleasant smell.
Acetone for the preparation of an emulsion base
If the pollutant stain has not yet been removedfrom the surface of clothing with the help of a solution of ammonia, then we will have to apply more radical methods. For this purpose, some means of household chemicals can be used. Disadvantages of using radical methods is the high probability of damage to clothing. To avoid this, before using any radical remedy, you should try it on a small area that will not be noticeable when you wear the thing.
White spirit for the preparation of an emulsion base
As radical compositions that can be used to remove the correction fluid on an emulsion basis, there may be:
kerosene and some others.
Since all these chemicals have a high degree of flammability, then when working with them, you should follow the rules of fire safety.
Kerosene when removing stains from clothes
The application of these funds should be carried out onthe front side of the fabric. Apply the product 2 times with a break between applications for 15-20 minutes. After applying to the front side, the product should also be applied to the underside of the fabric.
After conducting a manual wash, you need a normal washing with the use of a detergent
Once the contamination is removed,it is good to wash the thing with your hands. This is required to get rid of the unpleasant odor. After carrying out manual washing, you need a normal washing with the use of a detergent.
Removing the corrective tape from the clothing and preventing the appearance of contaminants
In some cases schoolchildren manageDirty the mold with a dry tape with corrective compound. For this reason, many mothers are wondering how to wash the putty from the black clothes. In order to remove the stain formed from such a corrector, it is necessary to pre-soak the thing in a warm soap solution. Corrective tape after 20-30 minutes of soaking easily starts to move away from the fabric. To speed up the process, you can use a nail file.
In order to remove the stain formed from such a corrector, it is necessary to pre-soak the thing in a warm soap solution
In case of contamination of clothing,made of silk or velvet, you should not try to withdraw it yourself. It is best to entrust the procedure of cleaning the cloth of clothing to specialists - turn to dry cleaning. Home conditions are not suitable for such work, and home experiments are capable of irrevocably spoil the thing.
Pollution is easier to prevent. When acquiring a corrector for a child, it should be responsible for choosing it. Choosing a good corrector will reduce the likelihood of contamination, and if it does, spot removal is easy at home.
For children, it is best to purchase a tape corrector, and in case of contamination it is necessary to teach the child to clean the form by himself
For children, it is best to purchase a tape corrector, and in case of formation of contamination, the child should be taught to clean the form by himself.
In the process of removing stains, it is recommended to add a stain remover when washing.