How to hang a TV on the wall

Wall mounting of household appliances frees upfree space, saves the user from unnecessary furniture. Before you hang the TV on the wall, just make sure its load-bearing ability, rationally choose a place, use a suitable bracket.

It is not recommended to install “plasma” in niches, heavy LED modifications on plasterboard walls, use of brackets with several degrees of freedom for models of TV receivers heavier than 22 kg. The recommendations of the experts below will help determine how to hang the TV on the wall without resorting to specialists.

What TV models can I hang on the wall?

Before you enter the TV receiver into the interior, you need to consider several factors:

  • TV weight - small models (within 24 ”) are equipped with special fasteners for wall mounting
  • load capacity of the wall - partitions, false panels made of chipboard, gypsum board for these purposes will not work
  • the presence of natural ventilation - installation in niches is not recommended, as the heating of the device increases
  • ways of cable entry - when choosing brackets with several degrees of freedom, it is necessary to use the supply of the antenna cable supplying the cord, to exclude their tension, which is fraught with short circuit
  • When determining the wall section, where to hang the TV on the wall, you should focus on the advice of specialists:
  • the optimal viewing distance that is safe for users to view is considered to be removing the screen from the sofa / chairs at a distance equal to 10 device diagonals
  • the middle of the screen should be approximately at the level of the user's face at the time of viewing programs
  • These recommendations are especially relevant for non-adjustable brackets, because the pictures of most budget LED models sharply lose their clarity when viewing angularly.

    Ways to wall mount your TV

    Modern apartments, cottages are equipped with TVreceivers, both in living rooms (bedroom, living room, children's room), and in functional rooms (kitchen, study, library). Moreover, in some of them there are PCs, laptops that are not intended for wall mounting.
    Thus, fixing the "plasma" or LED modelthe TV on a vertical surface, the user frees up space for the computer table, inside which the system unit is located, on the countertop display, on a sliding keyboard module. Devices do not interfere with each other, the TV is controlled by a remote control.
    Before you hang the TV on the wall, you need to familiarize yourself with the proposals of console structures, brackets of domestic, foreign manufacturers. The most popular of them are:

  • rigid mount - no regulationrotation angle, the body is fixed to the wall, providing maximum rigidity, reliability, design life, in 90% of cases, such brackets are included in the equipment
  • bottom degree of mobility - adjustment is possiblethe screen vertically, the necessary tilt is fixed in several ways (usually by a threaded connection or a key), the strength and structural rigidity are slightly reduced
  • several degrees of freedom - the body of the TV receiver is adjustable in vertical, horizontal planes, the resource of the bracket is sharply reduced, these modifications are not recommended for heavy TVs
  • The cost of the latest models of bracketsmaximum, the TV can extend for the duration of viewing from the wall, tilt, slide back after turning off. Rigid mount is more suitable for large "plasma" in the living room or a small LED TV in the kitchen. Experts recommend giving preference to metal structures with a large margin of safety, guaranteeing the safety of the electrical appliance.

    Choosing a place for TV wall mount

    There are general posting rules.electrical appliances, recommendations for interiors of residential, functional premises. For example, the best option for an exclusive living room interior with a bio-fireplace may be to place an integrated LED panel directly above the heater.

    The functionality of the recreation area is increasing,built-in appliances do not conflict with each other, vacationers' attention is focused on two independent decor elements, both at the moment of their inclusion and in the off state of each of them.

    When deciding how to hang the TV on the wall,reliable, you can give preference to the adoption of this device as an independent design element. This picture clearly demonstrates the saving of working space:

    This option is appropriate when choosing a stylisticthe design of the bedroom, high-tech style living room or minimalism. In children's rooms, a household appliance installed at a height of 1.7 - 1.5 m ensures maximum safety for young users. The screen is protected from accidental mechanical damage when playing with peers, children are guaranteed not to get an electric shock. Remote control operation is completely safe for any age.

    Frames for TV receivers, produced by many manufacturers, are not independent fastening elements; they serve for high-quality integration into the original interiors of interior spaces.

    They can be used only for built-in modifications, since the side frame sharply reduces the natural ventilation of the devices.

    Secrets of operating a wall-mounted TV

    Before you hang the TV on the wall,make sure that when drilling the wall for mounting the bracket, the wiring will not be damaged. The appliance body must ensure the normal opening of the doors, windows, and not be damaged by them when spontaneously opening from drafts. If necessary, additional sockets for electric cable and cable television antenna jacks are mounted.

    When installing TV on drywall partitionsadditional reinforcement of the frame is necessary by adding profiles in the places of fixation of self-tapping screws, which secure the bracket. For wall mounting of the TV under wall cabinets (relevant for the kitchen, living room), vertical fasteners can be used instead of wall brackets.

    In this case, the structural strength should ensure high-quality fixing of the bracket, taking into account the weight of the TV receiver.

    Lack of furniture around the installation siteprovides increased natural light. Therefore, the image quality of a glossy screen may decrease on the sunny side when it comes in direct light. Even embedded LCD panels require minimal natural ventilation. Usually, for this, leave a 20 cm gap around the perimeter. It is not recommended to install TVs near heating appliances, PC system units, kitchen microwaves.