Textured wall paint

Repair in the house is complicated and exciting.the process for both owners and designers. One of the basic stages is the decoration of the walls of the premises. Here you need to find the perfect balance between cost, labor and the desired result. A true discovery in this area was textured wall paint. It allows you to create embossed surfaces andEffectively highlight walls in any room. You can apply such a coating yourself, and a variety of design solutions gives wide scope for imagination.

Main characteristics

What is so good textured paint for the walls?

Attractive appearance

The choice of surface topography is amazing. It can be an imitation of various fabrics (from silk and velvet to velveteen), brick, stone, leather, sand or parchment. The texture can be made as pronounced, using deep grooves, and barely noticeable fine-grained.

Creativity with textured paint


The density of this coating is higher than that of conventionalcolors. It is resistant to external influences, temperature extremes, high humidity, direct sunlight. Keeps color fresh for a long time and is easy to clean. That is why textured wall paint is so often used to process building facades.

Textured exterior

Environmental friendliness

The paint is highly vapor permeable. Due to this characteristic, the walls are not clogged during the coating process, but allow air to freely pass through the smallest “pores”. This makes indoor air exchange more free and natural.

Another advantage is protection against the formation of mold, fungus due to the density of the coating and hypoallergenic composition.


The basic composition of textured paint allowsuse it absolutely for any ideas and solutions. It is available in white, and the desired color can be given to it directly upon purchase, choosing from a huge palette. The desired shade is added to the base and mixed thoroughly.

Creative textured paint ideas

Cost optimization

This type of coating is one of the mosteconomical. Despite the fact that due to the increased density, its consumption increases slightly, the total cost of the paint is very low. This is a great choice for those who do not have a large budget for repairs, but are not ready to save money at the expense of quality.


Textured paint - the perfect solution forimperfect walls. It can be applied on uneven surfaces, chips, cracks. If the old coating has a strong grip on the wall - it can not be removed before painting. This will help save time, effort and money in preparation for painting. The relief will make it possible to give the surface a general uniformity and hide its flaws.

Textured paint in the interior

Variety of composition

To create a different relief is useddifferent amount and size of filler. The smallest, barely noticeable relief is created with the help of fine-grained additives (size up to 0.5 mm). A slightly more “persistent” texture can be made using medium grain (from 0.5 to 1 mm). Coarse-grained filler (from 1 to 2 mm) makes the coating pronounced and effective.

The main materials from which it is madefiller, ranging from synthetic to natural. The most popular synthetic fibers, it can also be quartz dust, stone chips, sand, sawdust, crushed or crushed gas silicate.

Various reliefs

Tool selection

The success of a planned relief depends on twofactors: experienced hand of the master and the selected tool. Simple textures can be created by yourself. To do this, it is advisable to pre-train on a piece of paper or a small section of the wall hidden behind the furniture (so that in case of failure it does not spoil the interior). But for more complex design ideas, it is recommended to invite a specialist with a certain experience. In the pictures, the process of creative wall covering looks quite simple, but in fact, due to a lack of experience, the result may be far from expectations. Due to its strong adhesion to the wall, textured paint is very difficult to remove, so it is important to take care of success from the very beginning.

Sophisticated texture

Hardware stores offer a wide range of relief tools. Simple textures are easy to apply. spatula. It is his best to prefer the usual paint brush. The density and texture of the paint implies wide strokes, which are convenient to make with a small spatula up to 15 cm wide.

To create a specific pattern are offered structural rollers with a relief already applied to their working surface. This somewhat limits the flight of fantasy, but the result will be more or less predictable.

Structural roller work

Metal combs help to decorate the wall with a pronounced relief, good for geometric patterns. This tool requires some preparation, in the hands of a beginner, it may not be so effective.

Creation of relief by comb

Suitable for the creative process natural sponges. They will add soft, elegant lines to the surface texture, but are also good only for an experienced craftsman.

Sponge staining

Staining recommendations

Surface pretreatment

Despite leveling the wall and strippingit will not be required from previous coatings; minimal preparation should nevertheless be carried out. To do this, you need to carefully treat it with a primer, paying attention to each site. This procedure is especially important in the presence of chips and cracks: it is important to ensure that all irregularities are primed. The primer coating needs to be dried well, so you can start staining no less than a day later. This will provide high grip and wear resistance.

Paint preparation

Textured wall paint should be carefullymixed before starting work. The filler should be well distributed within the composition, otherwise the coating will be uneven. It is important to make sure that the paint is not expired and kept tightly closed. Before painting, the paint is warmed to room temperature to ensure perfect density and viscosity.

Staining process

Textured paint is applied in layers. If the color was not initially added to the base, the wall is covered with colored paint after the main first layer has completely dried. As a rule, this process takes two days, sometimes more, depending on the ambient temperature and humidity.

Coating is necessary, graduallymoving from one edge of the wall to the other. In the process, it is better not to interrupt, otherwise the places of “stops” may be noticeable. Therefore, it is easier to work in four hands: one puts a layer of paint, and the other creates a relief using a special tool, following the first master. It is undesirable to swap places or break up the work, because the drawing applied by the same tool, but by a different person, will inevitably be different.

If a roller was chosen as a tool for painting, it must be moistened before starting work. This will facilitate the painting process and significantly improve the result.

Different staining methods

Important points

If the height of the walls is more than 3-4 meters, they should be painted with special compositions that do not drain and do not smooth the protruding parts. It is easy to find such a paint by special marking.

When choosing a relief, one should rely not only onown imagination, but also take into account the practical side. If the house whose facade is to be painted is located in a windy place, near sand or a busy road, this will affect its appearance. Therefore, it is important that the facade is easy to wash, and it is advisable to choose a simpler texture. Dust and sand will clog into a complex deep relief, and it is much more difficult to extract it from there than from a simple one.

Textured wall paint is a great finish that will appeal to both prudent and thrifty people and creative people.